Wait 30 minutes and confirm that the proper temperature has been restored once the defrost cycle has completed.įood stored uncovered or unwrapped, and damp containers can lead to moisture accumulation within each compartment. Maintaining a reasonable level of humidity in the home will help to control the amount of moisture that can enter the compartments.ĭuring the defrost cycle, the temperature of each compartment may rise slightly and condensation may form on the back wall. Humid weather allows additional moisture to enter the compartments when the doors are opened leading to condensation or frost. Wait 30 minutes and confirm the proper temperature has been restored once the defrost cycle has completed. If the temperature is too warm, adjust the control one increment at a time and wait for the temperature to stabilize.ĭuring the defrost cycle, the temperature of each compartment may raise slightly and condensation may form on the back wall. Temperature control is not set correctly. See the Doors will not close correctly or pop open section in Parts & Features Troubleshooting. Allowing hot food to cool to room temperature before putting it in the refrigerator will reduce this effect. The refrigerator should not be operated in temperatures above 110F.Ī large amount of food or hot food was added to either compartment.Īdding food warms the compartment requiring the cooling system to run. To lessen the effect, reduce the frequency and duration of door openings. This raises the temperature and moisture level within the compartment. When the doors are opened often or for long periods of time, warm, humid air enters the compartment. Rearrange items to allow air to flow throughout the compartment.ĭoors are opened often or for long periods of time. Refrigerator or Freezer section is too warm.
Do not remove the panel covering the condenser coil area. Use a vacuum cleaner with an attachment to clean the condenser cover and vents. The refrigerator should not be operated above 110☏. Under warmer conditions, expect it to run even more often. At normal room temperatures (70☏) expect your compressor to run about 40% to 80% of the time. The compressor will run longer under warm conditions. Refrigerator is installed in a hot location. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food Is removed.įirmly push the doors shut.
The refrigerator will take up to 24 hours to cool completely.ĭoor opened often or a large amount of food / hot food was added.Īdding food and opening the door warms the refrigerator, requiring the compressor to run longer in order to cool the refrigerator back down. Refrigerator was recently plugged In or power restored. Modern refrigerators require more operating time but use less energy due to more efficient technology. Refrigerator is replacing an older model. If the refrigerator was stored for a long period of time or moved on its side, it is necessary for the refrigerator to stand upright for 24 hours before connecting It to power. It may take up to 24 hours for each compartment to reach the desired temperature. The refrigerator control is set to OFF (some models).ĭemo Mode allows the lights and control display to work normally while disabling cooling to save energy while on the showroom floor.ĭuring the defrost cycle, the temperature of each compartment may rise slightly. Refrigerator and Freezer section are not cooling.
0 kommentar(er)
